Chip Handling & Replacement
The chip must be handled carefully; only certain areas should be touched to prevent harming the chip.
Fingers can touch the back metal prongs on the chip.
Do not touch this area with fingers nor pliers.
When removing and installing the chip, use this as the main contact point.
When Removing the Chip
When removing the chip, grab one of the silver pins on the front with pliers, and pull directly outwards.
Installing the Chip
Installing the chip within the SeaTag is rather simple. It's important to note that the holes within the tag do not hold polarity, so the chip maybe installed either way.
Align the chip with the holes within the tag, and push it securely into place.